Product Overview
DESCRIPTION
This stain application pack is ideally suited for staining your fences, retaining walls etc. with minimum effort and mess! This application pack can be used with our BitPost or our StainDex products.
We recommend using the roller to coat your rails and fence posts and then come back with the 100mm brush to touch up between the rails and posts as BitPost will not show any lap marks.
We recommend using the 20ltr Bucket filled about half way with BitPost, rather than a paint tray. We have included a plywood paint platform that fit inside the bucket for the roller to be coated with BitPost. Paint trays are cumbersome and almost always end up in spillages.
The bucket can be easily closed with the lid and ready for use the next day without cleaning between applications.
THIS APPLICATION PACK INCLUDE
- 1 by 20 Liter paint bucket with lid and handle
- 1 by Plywood paint roller platform
- 3 by paint roller sleeves
- 1 by paint roller handle
- 2 by 100mm fence paint brushes
- 1 pair safety glasses
- 3 pairs latex disposable gloves
Extended Information
Cleaning: Clean up for oil based stains (incl BitPost) is with Mineral Turpentine, allow to dry before storing.
WARNING: BitPost and other paints and stains does contain solvents and/or other chemical ingredients. Adequate health and safety precautions should be observed during all storage and use. Please use the included cloves and eye protection glasses to protect you against any likely spillages.
This Application Pack is Recommended for multiple use
