Contractors Low Cost Water Based Paint - White

(No reviews yet) Write a Review
Usually ships in 24 hours during working days.
Adding to cart… The item has been added

Product Overview


Our good quality Water Based Preparation and General purpose Low cost contractors Paint is an innovative aqueous, alkyd emulsion binder-based sealer, primer, bonding liquid and undercoat paint. This innovative undercoat and top coat paint is formulated and designed specifically to provide the foundation for a long-lasting  finish.

It is suitable as a general paint for most surfaces around your home including ceilings and walls and can be used on both interior and exterior substrates. It has an excellent balance of water resistance and mechanical dry film properties, providing superior long-lasting performance-oriented protection.

Because of its rot-resisting and disinfecting effect, our Water Based Preparation Coat is ideally suited as a sealer and undercoat for GIB plasterboard, cladding and timber etc. This is a low odour, Formaldehyde and Alkyl phenol ethoxylate (APOE*)free product.

* APEO and Formaldehyde are not intentionally added and are not knowingly introduced from another raw material.

One (1) Litre will cover approximately 6 to 8 Square Meters.

Our Water Based Coating  is intended primarily for surface application by brushing, rolling or by airless spray equipment.
Our Water Based White Paint can be painted over with  a suitable Acrylic or Aqua Enamel Alkyd topcoat, such as our ClimoPlate topcoat or any other acrylic top coat paint or it can be left as a final coat.

This product is typically used as a sealer, primer, bonding liquid or undercoat. But is also suitable as a ceiling or wall paint.

This product is currently only available in the colour WHITE.

Please have a look at our BitPost ™ Fence Stain Application Pack for sale under the Consumables & Equipment category as it is also suited for this product

This product is only available in 10liter plastic open top paint pails.



  • Interior & exterior surface preparation coating (Sealer, Primer & Undercoat)
  • Can be used on GIB, ceilings, timber and a wide range of substrates
  • Our Preparation Coat is water based so clean-up is with water
  • Can be used on most surfaces and substrates without the need for sanding
  • An environmentally safe and nontoxic product that is safe to use around animals
  • Exceptional coverage and easy application
  • High viscosity to minimise any over-spray when applied with spray equipment.
  • Contains biocides to eliminate moss and mould growth.
  • Can be applied over existing stained or painted substrates.



For more detailed information please see our documents below.

Packaging: Available in 10 Litre Plastic open top paint bucket only.

Our Preparation Coat is a water based, water-soluble, non-flammable, white alkyd polymer paint.
Our Preparation Coat gives a high degree of water repellence and will retard substrate distortion.
Our Preparation Coat is non-flammable.
Our Preparation Coat is non-corrosive to metals and can have a protective action on iron and steel.
Our Preparation Coat is nontoxic and is safe around your animals.



Appearance: Creamy thixotropic WHITE paint
Solids Content: 44%
Volume Solids: 26%
Density: 1.38 Kg/Ltr
pH: ~8.5
Dispersant: (active based on total powders) 1.0%
Coalescent: (based on polymer solids) 5.0%
Krebs Stormer (KU) 118-122
ICI Cone and Plate (Poise) 1.6-1.8
Brookfield (spindle 4 / 60 rpm) (mPa.s) 8500 – 9500
Brookfield (spindle 4 / 6 rpm) (mPa.s) 17500 - 20000



These documents contain important information about:

  • Material Safety Data
  • General Information
  • Application
  • Storage
  • Safe use
  • First Aid
  • Clean Up
  • Warranty
  • Available Packing Sizes
  • and more information

Note: To view the following PDF documents, you will require some type of PDF-reader plugin on your system.
If you need an up-to-date plugin you can install Adobe's free PDF reader from here.


Material Safety Data Sheet (MSDS)

Product Data Sheet (PDS)


(No reviews yet) Write a Review