StainDex™ is a New Zealand manufactured co-polymer timber stain and preserver product.
Because of its rot-resisting and disinfecting effect, StainDex™ is ideally suited for the preservation and staining of wooden structures such as Decks, Outdoor Furniture and Post and Rail fences etc.
StainDex™ the outdoor wood stain everyone loves.
Timber requires one coat only and One (1) Litre will cover approximately 3 to 5 Square Meters depending on the substrate.
- 4ltr will cover approximately 12 to 20 Square Meters
- 10ltr will cover approximately 30 to 50 Square Meters
- 20ltr will cover approximately 60 to 100 Square Meters
StainDex™ is intended primarily for surface application by brush,roller, paint pad (sheepskin sock) or airless spraying.
A re-coat will be required after 5 to 8 years.
Please see the Colour Chart image/photo below for the colours in our range. We are in the process of adding more colours to our range. (Please ask via "eMail" if you would like us to match a specific colour for you, and we will advise)
Please note you can now select your prefered product packaging.
- StainDex™ will retard distortion, movement and splitting of timber, due to weather exposure
- StainDex™ is non-corrosive to metals
- Can be used on other wood structures
- Will penetrate the timber rapidly
- For best results apply to dry timber
StainDex™ is idealy suited for:
- Decks and hand rails
- Outdoor Furniture: As it will not rub - off on clothing.
- Fences and retaining walls
For more detailed information please see our documents below.
Packaging: Available in 4, 10, 20 and 200 Litre containers. Plastic jerry can, Metal flasks with bericap, Plastic open top paint bucket, Metal open top paint pail and Metal drum with bungs.
StainDex™ is an oily water emulsion, water-soluble, non-flammable, pigmented mixture from bitumen, polymers, water and petroleum components.
StainDex™ is a New Zealand manufactured, bituminous emulsion / polymer product which will penetrate the timber rapidly due to its viscosity.
StainDex™ gives a high degree of water repellence and will retard distortion, movement and splitting of timber, due to weather exposure.
StainDex™ preserver is non-flammable and the treated wood, after drying, presents no greater fire hazard than ordinary timber.
StainDex™ is non-corrosive to metals and can have a protective action on iron and steel.
These documents contain important information about:
- Material Safety Data
- General Information
- Safe use
- First Aid
- Clean Up
- Available Packing Sizes
- and more information
Note: To view the following PDF documents, you will require some type of PDF-reader plugin on your system.
If you need an up-to-date plugin you can install Adobe's free PDF reader from here.
Material Safety Data Sheet (MSDS)
StainDex Product Data Sheet