GloTex CPM - filled textural membrane

GloTex

(No reviews yet) Write a Review
$104.45
SKU:
GT cpm
Availability:
Usually ships in 24 hours during working days.
Adding to cart… The item has been added

Product Overview

DESCRIPTION

Biosymph’s GloTex™ CPM (Co-Polymer Membrane) has been designed to meet the needs of the future. This product is an aqueous APEO (Alkylphenol ethoxylates) AND FORMALDEHYDE FREE Acrylate copolymer bitumen modified, fumed silica filled textural compound, used for flexible interior/exterior coatings.

This coating has an UV curable and cross linkable component which is initiated when the film surface is exposed to sunlight/UV, thus increasing the durability and performance. This cross-linking feature will also act as a self-repairing mechanism making this product ideal for filled textural coatings.

This coating has good anti-carbonation and adhesion to a wide range of substrates and is ideal as a textural concrete or ceiling paint with very good dirt resistance, while allowing water vapor permeability.

GloTex™ is specifically designed as a textural ceiling / concrete coating. It will provide a strong, durable long-lasting and effective finish. Its remarkable flexibility ensures durability and resilience and boasts fast drying properties and offers excellent adhesion to a wide range of substrates. Moreover, its water washup feature adds convenience to the application process.

GloTex™ has been specifically but not exclusively formulated to act as a topcoat over bitumen-based sealers such as Biosymph’s GilsoFlex™ and FlexsoTar™ products for concrete surfaces. The chemistry used in this coating maximises performance with excellent durability. This product is non-toxic, filled with cellulose fibers, and can safely be used in applications where it comes into contact with drinkable water, animals and children.

GloTex™ is formulated to penetrate the surface, filling any gaps and creating a uniform textural topcoat finish. This helps to enhance the durability and longevity of the coating system and offers excellent aesthetic results.

  • 4ltr will cover approximately 4 to 8 Square Meters
  • 10ltr will cover approximately 10 to 20 Square Meters
  • 20ltr will cover approximately 20 to 40 Square Meters

GloTex™ is intended primarily for surface application by rolling with a special textural paint roller and brush.

A re-coat might be required after 10+ years.

We do carry our own standard colour range but please ask via "eMail" if you would like us to match a specific colour for you, and we will advise.

FEATURES

GloTex™ interior / exterior concrete paint is a versatile paint with remarkable flexibility that ensures durability and resilience. It boasts fast drying properties and offers excellent adhesion to a wide range of substrates and can be used in a wide range of applications:

• As a Top Coat over GilsoFlex™: GloTex is specifically developed to be compatible over such bitumen-based sealers and paints.
• On interior / exterior concrete surfaces
• On Timber and Plywood
• On other concrete, gib and timber substrates

Benefits:
• Excellent film integrity and colour to (80 °C)
• The fully dried paint allows for cleaning with typical household cleaners, without affecting the finish
• Lower VOC emissions
• UV Stable
• Long lasting

 

TECHNICAL SPECS

For more detailed information please see our documents below.

PRODUCT SPECIFICATIONS:
Packaging:
Available in 4, 10 and 20 Litre containers. Metal open top paint pails.
Solid content, weight %: 65 ± 1
Viscosity: very viscous paste to be applied with scraper / putty knife, stiff brush or special foam textural roller (like Haydn – Goop Loop Rollers)
pH (1:1 with water): 5.5 – 7

FILM PROPERTIES:
Appearance : Aesthetic Rough Textural with excellent durability, available in different colours (Some custom colours available)
Surface : Excellent flexibility

OTHER PROPERTIES: Fast drying, Excellent adhesion to a wide range of substrates for interior/exterior environments.
Physical State: viscous water based Paint paste, available in various colours
Odour: sweet Acrylic resin odour
Solubility: soluble in water (thinning and clean-up)
Boiling point: initial 100ËšC
Specific Gravity: less than 1.4
Dry Schedule film (Touch Dry): 21 °C /40 minutes.
Full Cure: 10-14 days
Drinking Water Safe: After 10 days curing and initial rinse (rain/hose/pressure)
Toxicity: None
Volume solids: 50% average
Shelf Life: 12 Months
Hazard: Non-hazardous, no labelling required
Theoretical Coverage Rate: 1-2 sq metres per litre depending on application thickness
Application: brush and tex roller
Recoat if required: 48 hrs
Number of coats: 1 (application dependant)
Bleed blocking: To achieve bleed blocking, apply 1 coat and allow 48 hour cure to encapsulate any potential bleed though.


Storage, Handling Safety: Please avoid extreme temperatures when storing (Below 0°C and above 40°C) as the product can gel if exposed to these extreme temperatures. The self-life is typically 12 months from the purchase date, if stored in ideal conditions. Refer to attached Material Safety Data Sheet (MSDS) also refer to attached “Health and Safety in the Surface Coating Industry” Brief 3, October 2007 as published by the Department of Labour.

 

PRODUCT DOCUMENTATION

These documents contain important information about:

  • Material Safety Data
  • General Information
  • Application
  • Storage
  • Safe use
  • First Aid
  • Clean Up
  • Warranty
  • Available Packing Sizes
  • and more information

Note: To view the following PDF documents, you will require some type of PDF-reader plugin on your system.
If you need an up-to-date plugin you can install Adobe's free PDF reader from here.



Documents:

Product Data Sheet (PDS)

Material Safety Data Sheet (MSDS)

“Health and Safety in the Surface Coating Industry” Brief 3, October 2007 as published by the Department of Labour.

 

Reviews

(No reviews yet) Write a Review