GilsoFlex ™ is a New Zealand manufactured dense black Bituminous/Gilsonite co-polymer, solvent / water emulsion based sealer and paint ideally suited for sealing and painting of exposed roofs and steel structures, developed primarily for New Zealand outdoor conditions.
GilsoFlex ™ Spraying Thinner is intended primarily for thinning GilsoFlex ™ roof paint to a suitable spraying viscosity. The thinner is a blend of Xylene, Kerosene and other hydrocarbon solvents. For best results use to a maximum of 10%.
The thinner can also be used for clean-up of spraying equipment etc.
For more detailed information please see our documents below.
- Packaging: Available in 4 Litre, 1 Litre and 0.5 Liter cans
Use: Suitable for use as a thinner for GilsoFlex ™ Roof Paint only. It is not compatible with other paint systems
Thinning Ratio: Maximum 10% (Typically 5% should be adequate)
– Contains volatile solvent, keep away from heat and open flame.
– Keep out of reach of children.
– Keep closed when not in use, avoid breathing vapor - ensure good air flow when mixing.
Storage, Handling Safety: Refer to Material Safety Data Sheet (MSDS GilsoFlex™ Thinner) also refer to “Health and Safety in the Surface Coating Industry” Brief 3, October 2007 as published by the Department of Labor.
These documents contain important information about:
- Material Safety Data
- General Information
- Safe use
- First Aid
- Clean Up
- Available Packing Sizes
- and more information
Note: To view the following PDF documents, you will require some type of PDF-reader plugin on your system.
If you need an up-to-date plugin you can install Adobe's free PDF reader from here.
Material Safety Data Sheet (MSDS)
“Health and Safety in the Surface Coating Industry” Brief 3, October 2007 as published by the Department of Labour.